How to carry out regular cleaning of the print head – Evolis Elypso

Please note that the print head is a delicate part of your printer. To avoid any damage to it:

• Disconnect the printer before cleaning the print head.
• Fully comply with the recommended cleaning cycles.
• Always avoid the print head to be in contact with sharp or metallic objects.
• Do not directly touch the print head surface with your fingers.

Please note that violating any of these recommendations could cause permanent damages to the print head.

• Unplug the power cable to power off the printer. The pushbutton switches off.
• Open the printer cover.
• Use a swab supplied by Evolis and press the centre of the tube until it clicks and releases the cleaning product.
• Gently apply the swab onto the print head, moving it from left to right and for a few seconds.
• Close the cover.
• Wait a couple of minutes before using the printer until the cleaning product has fully evaporated.
• Reconnect the power cable and power the printer on. The pushbutton turns on.